After Water Classic water filter, from water inlet turning on, puts through the power source, turns on the switch, then works. If the user needs the automatic control ambient humidity, may select and purchase me the factory production the humidity control meter
¢Ù, guaranting the equipment interior water level detector set correct work. The equipment should the level installment.
¢Ú, the equipment uses period of time, needs to atomize the piece, the water level switch and the box in vivo wall carries on the
clean, the elimination, because long-firing operation Forms the boiler scale, the clean cycle different varies according to the
water quality, in ordinary circumstances long-term usage 10-15 days, must inspect the clean One time. Before the equipment
clean, should first separate the power source, turns on the engine case lid with the key, twists off the atomization box box lid bolt,
turns on lathe the atomization again The box base turns on the water the bolt, emits the water from the freeing port, after the wate
r drains, takes the wet soft fabric few atomization piece cleaning media to clean 2 water The position switch and 12 atomization
piece surface, pure take do not have the boiler scale as standards. Cleans in the process, if has not separated the power source,
touches the water level with the hand When switch, will direct the machine misoperation, will cause the atomization dried sliced
loss by burning to be bad
¢Û, when clean please do not take down the atomization piece, atomizes in the cavity to enter the volunteer fire brigade to cause the
equipment trouble.
¢Ü, the internal water monitor installment breaks down accidentally, the volunteer fire brigade discharges from the riser, usually the
riser does not have an effect, but please not its jamming.
¢Ýbecause, machine interior haze separates out the fog mouth to be very near, possibly will have the extremely few tiny waterdrops
to leave by the wind zone, will leave on the fog mouth to affix About 40cm PVC tube then solves.
|
